PLUSPAC FD S14
PLUSPAC FD S14 is a new development in the field of polyaluminium chloride solutions and is different from conventional products due to its significantly improved performance. Feralco manufactures the products of the PLUSPAC family according to a process developed by Feralco. The high chemical activity is based on trivalent Al3+ ions and divalent metal ions. Due to its special composition PLUSPAC FD S14 is suitable for the most various applications and can be used for treatment of process water, municipal and industrial wastewater as well as coagulant and fixative in production processes with colloidal systems.
Product properties
- Formation of extreme stable micro flocks in slightly turbid systems (e.g. ground and surface water)
- Adapted for coagulation of humic acid in potable water treatment
- High polymerization level
- Very high cationic amount of charge
- High performance turbidity and suspended solids removal
- Effective in a broad pH-spectrum
- Effective at low temperatures
- Effective electrolyte and fixing agent at the stock preparation and wet end of paper manufacture
- High efficiency phosphorus removal
- Significant lower dosage than conventional Polyaluminium Chloride
Application, dosage and storage
The main fields of application are:
- Potable water treatment
- Process water treatment
- Fixing agent and flocculation aid at the stock preparation and wet end of paper manufacture (charge neutralisation)
PLUSPAC FD S14 should be dosed directly via suitable acid-resistent dosing pump into raw water, waste water or stock flow. Dilution prior to dosing is not recommended. The dosing installation should be installed in such a way, that a good intermixing is achieved. Optimum dosage has to be determined individually, for example by a laboratory test. For application advice please feel free to contact the Feralco team at any time.
Storage tanks shall be constructed in chloride- and acid-resistant material like glass-fibre reinforced plastic or rubberlined steel. Ensure that brass or mild steel fittings are avoided. Pipes and valves of PVC, reinforced polyester and other chloride- and acid-resistant plastic materials are satisfactory subject to temperature limitations.
A regular inspection and cleaning of the tanks and dosing installations is necessary.
Please contact us for more detailed product information.
For health and safety information, please see our Safety Data Sheets.
The above data are not binding and represent the current state of knowledge. A legally binding assurance of certain properties cannot be derived. Proprietary rights and existing laws and regulations should be followed by the recipient of our products on their own responsibility.